[lvca_tabs style=”style6″ highlight_color=”#ff7933″ mobile_width=”600″][lvca_tab tab_title=”Overview”]Creating a local radio station: Everything you need to know to make your local FM radio station work – it must be broadcast in the widest possible territory; For this several parameters come into play, the most important are:

The chosen place of emission,

-the more your antenna will be placed high and clear of any obstacle the more your radius of emission will be extended. You should know that the waves in FM are propagated to direct view therefore any obstacle like building, hill, drill will attenuate the signal of your transmitter you must therefore choose a building as high as possible to install your antennas of emission.

-You can also choose a hill on the outskirts of the city within a radius of 2 to 5km; In this case, the places of emission being different from the location of your studio, which in principle will be in town, the two points will be connected by what is called a radio-relay. This solution has the advantage of having your studio in town and benefit from a large broadcast area thanks to the height of your antennas,

– and you will be able to further enhance the quality of listening in your area of ​​emission by increasing the power of your transmitter.

-It is very important to understand that it is not the power of your transmitter that will define the zone of emission but the height of your antennas;

To be more concrete if you have a 1000 w transmitter placed in town on a building that is not cleared it will have a significantly lower coverage radius than a 100w transmitter placed on a building or a hill overlooking the city[/lvca_tab][lvca_tab tab_title=”Composition”]30W-300W mod. TX30-TX300
TX30 and TX 300 are new FM drivers / transmitters with high reliability, ultimate mating design, user-friendly operation and maintenance, cost-effective ect. Complete normal power supply is guaranteed in all condit on and thanks to the alternating mode power supply switching (90 to 260 VAC) the transmitters can be installed

MASTER-DESK-1R-R
Rack table

MASTERDESK-A CC-1R
Cabling accessories and furniture construction: electrical panel with sockets (Schuko), support for machines, cable trays, rack closure panels, cage nuts and rack screws

Oxygen 3
Overview OXYGEN 3 is a compact audio console for On Air and production in the field of radio broadcasting. It is very simple to use and offers maximum flexibility of operation. The OXYGEN 3 console is a complete and stand-alone piece of hardware, requiring no additional hardware to operate. All relevant functions are integrated

DIAL-10
Dual Band GSM gateway

PC1000R
CD / MP3 player with USB port (up to 1GB) and SD (up to 32GB) front and rear. Pro anti shock drawer. Backlit display, balanced and unbalanced XLR output on spindle, coaxial and optical output. IR remote control and RS232 serial port

PR1000R
Professional AM / FM RDS Receiver, 1U Rack

HS50M
Single amplified professional loudspeaker in close field.

HD20
Sennheiser

PROCASTER
RØDE Procaster, broadcast quality dynamic microphone, designed for voice performance.

PSM1
Elastic anti-vibration support for Rode microphone: Procaster, Podcaster, NT1-A and NT2-A. Color black, 390gr weight

MIKA-ARM-OA
“Mika” pantograph microphone with hi-tech aluminum with signal light On Ai

MRLIGHT-LPWS
Alim. For MrLight L / LD usable for a max of 3 Lamps (Led) 110 / 220VAC. Separate lighting control and flashing

MIKA-PDK
Mounting system table for monitor support – MIKA

E84
Dynamic Cardioid Microphone

DST11
Telescopic microphone rod

WSBRD
Workstation Broadcast Rackmount

Soundtrack Studio
Overview SOUNDTRACK STUDIO is the radio automation software featuring on air and production facilities covering all the needs of the radio station. SOUNDTRACK STUDIO combines ease of use, broadcast quality while being cost effective. No need for specific training or qualified technicians, it offers full functionality

DML Audio
Overview DML AUDIO recording system includes non-stop recording, long-term archiving, content and navigation media export / conversion. DML AUDIO records audio streams from the widest range of sources (RF, antenna, decoder, stereo line, etc.) and stores them on the hard disk (recordings remain online according to the capacity of the hard disk

HD-SATA-1000 GB
HD Seagate SATA 1000GB ES Enterpri

MAYA44 XTE
Sound card ESI – Maya 44XTe. 4 unbalanced mono inputs and 4 unbalanced mono outputs, or 2 unbalanced stereo inputs and 2 unbalanced stereo outputs. In / Out to 6.3mm Jack and S / PDIF, 24bit / 96kHz sampling. WDM driver, DirectSound, ASIO 2.0 PCIe slot X1.

KVM-KEYB-ENG -USB
USB Keyboard (QWERTY) – EN

KVM-MOUSE-USB
Logitech USB Mouse

Genius D
Overview GENIUS D is an all-digital audio gateway, designed for radio and television broadcast markets.

Falcon 3i
Overview FALCON 3i is a most cost effective and high performance equipment combining Digital Audio Processor, Stereo Generator and RDS Encoder. The all-in-one solution designed for FM broadcasting, webradio and satellite stations. FALCON 3i offers a loud, loud and clear sound, thanks to the 4-band architecture, Dual Band AGCs, 3-band equalizer, speech detector

F-RDS-3
Digital RDS / RBDS encoder option for Falcon 3i. Generating static data

LAN-GS1100-16
16 ports Gigabit Ungérer Switc[/lvca_tab][/lvca_tabs]