Creating a local radio: Everything you need to know for your local FM radio station is high-performing – it has to broadcast in the widest possible territory; for this reason several parameters entering into games, the most important are: the chosen place of emission,

-More your antenna SERIE WARM UP AND BROADCAST YOUR NEED AND YOUR REASON FOR SERIES WIDE SERIES. You have to know that FM waves are propagating to direct view so any obstacle like building, hill, drill will attenuate the signal of your transmitter you must choose a building as high as possible to install your transmit antennas.

-You can also choose a hill on the outskirts of the city within a radius of 2 to 5km; In this case, the places of emission are different from the location of your studio, which are in line, the two points are connected by what is called a radio-relay. This solution is available for your studio in town and benefits from a large broadcast area thanks to the height of your antennas,

– moreover you are thereafter to reinforce the quality of listening in your zone of emission by increasing the power of your transmitter.

-It is very important to understand what is not the power of your transmitter that will define the emission area plus the height of your antennas;

to be more concrete if you have a 1000 w transmitter placed in town on a building that is not cleared it will have a radius of coverage significantly lower than a 100w transmitter placed on a building or a hill overlooking the city

The new 600W TX was obtained by optimizing the TX05 RF Module housed in the same mechanical mechanism of the compact TX300, FM Transmitter 300W. This new 600W FM transmitter includes the same controls, user interface and FM modulator platform effective in the TX05 FM Transmitter. By means of mechanical modificationsMASTER-DESK-1R-R
Rack table

Cabling accessories and furniture construction: electric panel with pedestals (Schuko), support for machines, cable trays, rack closure panels, cage nuts and rack screws

Oxygen 3
Overview OXYGEN 3 is a compact audio console for On Air and production in the field of broadcast radio. It is very simple to use and to offer maximum flexibility of operation. The OXYGEN 3 console is a complete and stand-alone piece of hardware, requiring no additional hardware to operate. All functions are relevant

Passerelle GSM Dual Band

Lecteur CD / MP3 avec port USB lecteur (jusqu’à 1 Go) et SD (jusqu’à 1 32 Go) avant et arrière. Tiroir pro anti choc. Écran rétro-éclairé, sortie XLR symétrique et asymétrique sur la broche, sortie coaxiale et optique. Télécommande IR et un port série RS232

Récepteur AM / FM RDS professionnel, rack 1U

Single haut-parleur amplifié professionnel en champ proche.


RØDE Procaster, microphone dynamique de qualité diffusé, conçu pour les performances vocales.

Support élastique anti-vibration pour microphone Rode: Procaster, Podcaster, NT1-A et NT2-A. Couleur noire, 390gr poids

“Mika” micro-pantograph rod a hi-tech aluminum with signal light On Ai

Alim. For MrLight L / LD usable for a max of 3 Lamps (Led) 110 / 220VAC. Ignition management and flashing of separate lamps

Mounting system table for monitor stand – MIKA

Cardioid Dynamic Microphone

Telescopic microphone rod

Rack mounting station

Studio Soundtrack
Overview SOUNDTRACK STUDIO is the radio automation software featuring on air and production facilities covering all the needs of the radio station. SOUNDTRACK STUDIO combines ease of use, broadcast quality and cost-effectiveness. No need for specific training or qualified technicians, it offers complete complements

DML Audio
Overview DML AUDIO Recording system without recording, long-term archiving, content and navigation export / conversion media. DML AUDIO records audio streams from the widest range of sources (RF, antenna, decoder, stereo line, etc.) and stores them on the hard disk (online recordings according to the capacity of the hard disk

HD Seagate SATA 1000GB ES enterpri

Sound card ESI – Maya 44XTe. 4 unbalanced mono inputs and 4 mono asymmetrical outputs, or 2 unbalanced stereo inputs and 2 unbalanced stereo outputs. In / Out to 6.3mm Jack and S / PDIF, 24bit / 96kHz sampling. WDM driver, DirectSound, ASIO 2.0 PCIe slot X1.

USB Keyboard (QWERTY) – EN

Logitech USB Mouse

Genius D
Overview GENIUS D is an all-digital audio gateway, designed for radio and television broadcast markets.

Falcon 3i
Overview FALCON 3i is the most cost effective and high-combining digital audio processor, Stereo Generator and RDS Encoder equipment. The all-in-one solution designed for FM broadcasting, webradio and satellite stations. FALCON 3i offers a loud, loud and clear sound, thanks to the 4-band architecture, Dual Band AGCs, 3-band equalizer, speech detector

Digital RDS / RBDS encoder option for Falcon 3i. Generating static data

16 ports Gigabit Ungérer Switc

Get the latest news